Kitcar Build

Kitcar Build

Kitcar Blog

This blog is to cover out progress through the stages of the strip down and rebuild of a robin hood kit car.
Started the blog a bit late as a fair bit of the stripdown has already been done, this is to follow our progress of the build.

Diff Strengthening pt 2

BodyPosted by Christian French Wed, March 16, 2011 12:27:33
Now that we had trial fitted the diff strengthener I decided to paint it in blue (the only paint we had) before fitting it.

For some reason I managed to use a whole can of spray paint and not even get it fully coated, not sure why that was....


Had to relocate the fuel feed pipe as the existing hole was right next to the strengthening beam (can just see it to the left of the drill) so we relocated and shortened the pipe, and also properly grommetted the hole.

All fitted and bolted up, note the new fuel pipe hole

  • Comments(0)//kitcar.christianfrench.co.uk/#post29