Kitcar Build

Kitcar Build

Kitcar Blog

This blog is to cover out progress through the stages of the strip down and rebuild of a robin hood kit car.
Started the blog a bit late as a fair bit of the stripdown has already been done, this is to follow our progress of the build.

Steering Pt3

Other bitsPosted by Neal Manley Thu, June 23, 2011 20:07:42
so have had the new column made by a local engineering company it was turned from a solid piece of mild steel, has a 28mm hole with clearance in the middle the machining for the bearings at 35mm to the specified depths to accommodate the shaft.


the column was then welded for the mountings to enable it to be bolted to the cross member under the scuttle.


the existing stalks were used and just held in place with threaded rod.


  • Comments(0)

Fill in only if you are not real





The following XHTML tags are allowed: <b>, <br/>, <em>, <i>, <strong>, <u>. CSS styles and Javascript are not permitted.