Kitcar Build

Kitcar Build

Kitcar Blog

This blog is to cover out progress through the stages of the strip down and rebuild of a robin hood kit car.
Started the blog a bit late as a fair bit of the stripdown has already been done, this is to follow our progress of the build.

Finishing off

Other bitsPosted by Neal Manley Thu, June 23, 2011 20:33:44
So its getting close to finishing the car now, but as always things are sent to try us.

Have had a few problems with the brakes and had to purchase a new Master Cylinder, Starter motor is not engaging properly so have ordered a new one of those also, have discovered that the carbs are not jetted correctly so now will require new jets. This will explain the problems with the car not idling and running right.


Pedal box was to close to the driver and becomes uncomfortable after a while so have had to cut and and re shape the pedals for a nicer feel and fit.


re designed the clutch cable holder to stop the clutch from becoming lose when the pedal was knocked forward.


  • Comments(0)

Fill in only if you are not real





The following XHTML tags are allowed: <b>, <br/>, <em>, <i>, <strong>, <u>. CSS styles and Javascript are not permitted.